Our Maintenance Plans
Distress to Rest Plan
$18.50/mo
Protect your investment with the S.O.S Distress to Rest membership — HVAC & plumbing tune-ups, priority service, and member discounts for Millcreek, UT homeowners.
Benefits
- Priority service — members go to the top of the list on emergency calls
- No evaluation fees (9–5 Mon–Fri)
- After-hours evaluations more than 50% off
- 3 visits per year
- 24-point air conditioner inspection
- 20-point furnace inspection
- Whole-house plumbing walk-through
- Water heater flush
- Fireplace tune-ups & repairs
- 10% discount on any work that ever needs to be done at your home
Your three annual visits cover heating, cooling, plumbing, and your water heater — here's exactly what our technicians check:
19-Point Furnace Inspection
- Clean or change filter
- Check for gas leaks at valve and line
- Inspect blower motor and wheel
- Check fan amp draw
- Check inducer amp draw
- Inspect and clean condensate tubes
- Inspect and clean pressure switch and tubing
- Inspect and clean light dirt and debris from burners
- Reading of hot surface igniter
- Reading of flame rectification rod
- Inspect venting and terminations
- Inspect pilot and thermocouple, if applicable
- Vacuum unit out including blower compartment
- Check all wire connections
- Record temp difference
- Check all safety controls on furnace
- Check for any CO readings at flue and plenum
- Check thermostat operations
- Check gas pressure
24-Point Air Conditioner Inspection
- Clean or change provided filter
- Inspect blower motor and wheel (furnace)
- Inspect fan belt & pulleys and make necessary adjustments
- Inspect indoor coil
- Visual check for refrigerant leaks
- Check/clean thermostat and test operation
- Check refrigerant metering device
- Return air temp recording
- Supply air temp recording
- Total temperature change recording
- Check disconnect box wires and fuses
- Inspect fan bearing and lube if applicable
- Check operation of service valve
- Check operation of crankcase heater
- Check capacitor and start components
- Check contactor and all relays
- Check compressor amperage LRA & RLA
- Check fan motor amperage LRA & RLA
- Check suction pressure and temperature
- Check liquid line pressure and temperature
- Superheat & subcool readings
- Temperature of outdoor air entering coil
- Check refrigerant charge
- Inspect and clean outdoor coil
Contact Us
Water Heater Flush
We flush all the sediment from the tank — maintaining your warranty, extending tank life, reducing scale noise, improving heating speed, and lowering operating costs. Manufacturers recommend flushing at least yearly.
Whole House Plumbing Walk-Through
A room-by-room plumbing inspection to catch small leaks, worn fixtures, and slow drains before they become water damage or an emergency call.
Fireplace Tune-Ups & Repairs
Our technician inspects all electrical components of the insert, log set, or built-in unit, makes sure the gas line and hook-up are operating safely, and verifies the vent is clean and functional.